product manual:
DATAPAQ SelectivePaq
Dedicated to the confined space in the micro wave soldering process. This system consists of the new four letter with heat shield
Road DATAPAQ Q18 miniature data logger and optional sensor array PA1650 are composed to monitor the selective welding process
The stability provides a complete solution.
System Features
As the smallest electronic industry thermometer on the market, it can traverse the process with the product during the selective soldering process
To get the actual product temperature.
When used with the selective welding sensor PA1650, DATAPAQSelectivePaq can measure the preheat temperature at the same time
Degree and dip solder stability.
The system is equipped with a full set of DATAPAQRe?owInsight? software and data analysis functions, including:
■Maximum slope
■Maximum temperature
■Wave contact time
Host parameters:
model | DQ1804 |
Number of channels | 4 channels |
Size (length*width*height) | 150*37*17mm |
sampling interval | 0.05~10second |
Precision | +/- 0.5 °C |
Resolution | 0.1 °C |
weight | 0.3kg |
Thermocouple | Type K |
Temperature measurement frequency | 20 times/sec |
Thermal insulation box parameters
Insulation box model | TB 2088 |
image | 
|
Introduction | TB2088 protects the data logger from the process heater and maximizes the stability of the measurement circuit. |
weight | 0.3kg |
Size (height*width*length) | 20*40*180mm |
Thermocouple
Thermocouple model | PA1610 |
image | 
|
Introduction | Fast response thermocouple PA1610 with WeChat plug |
length | 0.5m |
Wire diameter | 0.2mm |
temperature range | 0~265℃ |
Precision | ±0.4% or +1.1°C |
Selective welding sensor PA1650
Sensor model | PA1650 |
image | 
|
Introduction |
The process sensor mounting board is made of aluminum, with a preheat sensor PA1651 and two dip solder sensors
PA1630. The performance of selective welding machines can be measured repeatedly. It is also equipped with a depth sounder and a hexagon wrench.
|
length | 0.5m |
Wire diameter | 0.2mm |
temperature range | 0~265℃ |
Precision | ±0.4% or +1.1°C |
