Products center
1. The timer controls the time of each drip, timing and quantitative dispensing to ensure the same amount of glue each time.
2. Adjust the air pressure, select the appropriate time and needle, you can change the amount and time of each drip to suit different needs.
3. It can inject liquid or slurry, such as red glue, yellow glue, epoxy resin, tin paste, silicon glue, flux and so on.
4. Two modes of foot control and manual control are available. With manual switch, it is more suitable for standing staff.
5. A variety of syringes and needles are available for selection.
6. Another automatic dispenser is available.
model | QUICK 982B |
Dispensing method | 16 modes such as manual timing and automatic timing can be set freely |
Glue time | 0.01S - 99.99SAdjustable |
Intervals | 0.1S - 9.9SAdjustable |
Repeated work error | ± 0.05% |
Internal working voltage | DC 24V |
Minimum amount of glue | 0.01ml |
Air pressure input | 0.25 - 0.7MPa (2.5-7kg) |
Air pressure output | 0.01 - 0.7MPa (1-7kg) |
Dimensions | 238*150*60 mm |
weight | approximately 2.9kg |
Company:Dongguan Zhibang Electronics Co. LTD
Adrress:Floor 15, Yuchang Building, No. 15, Dongyi Lane, Zhongfu Street, Shaguan District, Changan Town, Dongguan City
Copyright 2021 Dongguan Zhibang Electronics Co. LTD All rights reserved 粤ICP备14008616号